Furnace, Ovens and Kilns > Foundry > Bale-Out Furnaces > Electric Tilting Furnaces PDF Print E-mail
 
 

Electric Tilting Furnaces, A PTS Series

 
  

Image

 

  
 Product Description
 
  
 Electric Tilting Furnaces T max 1200 °C

Rugged casing construction

Good accessibility to the melting bath due to small outside dimensions

Friendly working conditions due to very low outer casing temperature

Low energy consumption, low operation costs as a result of excellent thermal insulation (approx. 0,4 kWh/kg aluminium)

Very low heat loss

High-quality heating elements (Kanthal A 1 for 1200 °C and Kanthal APM for 1300 °C furnaces)

Long service life of heating elements, because heating wire is wound on ceramic tubes, free heat radiation

Uniform heating of the melt and crucible due to heating from 4 sides

Edge of bale-out opening covered by heat-resistant cast-iron ring, thus protecting against mechanical damage

Optimum protection for the crucible by cover plate made of refractory concrete

Emergency drain outlet

Cable harness between control panel and furnace protected by flexible metal conduit, optimum protection against mechanical damage
Safe pouring due to tilting frame made of very rugged steel sections
Precision dosing and uniform pouring of the metal by manual control
2 Hydraulic cylinders with end-position damping
Heated from 3 sides (2 sides and rear wall)
  
 
 Product Specification
 Model       T max      Crucible           Power    Melting Rate*               Outside dim.         Wt     Volt
                   [°C]            [ltr]    [Type]            [kW]       [kg/h Al-alloy at 700°C]             A B C [mm]           [kg]      [V]
 30/12         1200         10     A70              18             30                                 1540x1850x1300      1250  400
 60/12         1200         20     A150            21             40                                 1600x1900x1200      1450  400
 110/12       1200         40     A300            27             55                                 1850x2000x1550      1500  400
 210/12       1200         80     TP287          53             120                               1950x2000x1600      1790  400
 400/12       1200         150   TP412          63             140                               2000x2100x1650      2180  400
 650/12       1200         240   TP587          82             200                               2150x2450x1900      2820  400
 970/12       1200         360   TBN800      102            250                               2250x2450x2000      3500  400
 
 
< Prev   Next >